Feature: 1. Low‑pressure spraying system, widely used in landscaping, cooling, air humidification, spraying, deodorization, air purification. 2. With fine atomizing nozzles, large filter area, wide atomization range, suitable for outdoor gardens, balconies and greenhouses. 3. High‑pressure atomizing nozzles need to select the appropriate aperture size according to different usage scenarios and effect requirements. 4. This nozzle can full utilize the pressure of tap water for atomization, and the effect is better when a high‑pressure water pump is used. 5. Suitable for greenhouse, livestock breeding, flower nursery, vegetable and fruit preservation, prevention of static electricity, haze damage, humidification and cooling. 6. Used in textile factory, electronics factory, paper factory, printing factory, automobile factory, wood (furniture) processing factory, power plants, steel factory, brewing, and food industries. Specification: Condition: Brand New Item Type: Garden Cooling System Material: PE Diaphragm Pump: Power: 60W Pressure: 0.8Mpa Water Flowing: 5L/Min Weight: Approx. 1364g / 48.1oz Hose Total Length: Approx. 6m / 19.7ft Application: 1. Wetting and Removing Rust 2. Air Humidification 3. Chemical Treatment 4. Chemical Spraying 5. Liquid Spraying 6. Leaf Humidification 7. Tablet Coating 8. Flue Gas Evaporative Cooling 9. Cleaning 10. Component Cooling 11. Fruit Wax Spray 12. Glazing Tiles 13. Factory Humidification 14. Salt Spray Test 15. Artificial Fog 16. Humidification in Other Places Installation Steps: 1. It is recommended to install the atomization system at a height of 2.5m-3m. 2. Turn on the faucet to clean the system for 1 minute to clean the impurities in the system. 3. Screw the spray nozzle to the tee fitting, except for the one at the end. 4. Turn on the faucet to clean the system for 2 minutes to sure that the system is completely cleaned. 6. Fix the atomization pipe with the provided cable tie saddle clamp. 7. Connect one end of the supplied water inlet pipe to the water inlet of the pump, and put the other section into the bucket. 8. Connect the water outlet pipe to the water outlet of the pump. The arrows on the pump cover points to the direction of the water outlet. 9. Turn on the power of the water pump until the sprayer works and enjoy the cooling atomization system. 10. When the atomization system is not used for a long time, close the nozzle and keep it dry and clean. . Package List: 1 x 12V Diaphragm Pump1 x Household Power Adapter1 x Assembly Accessory (Inlet Pipe + Filter + Anti-Floating Device)1 x Pump Inlet 90 Degree Elbow1 x Handle Clamp1 x G1/4 Spraying Hose (Totally 6m / 19.7ft)6 x Copper Sprayer6 x Sprayer Base1 x Hose End Plug20 x Hose Buckle20 x Hose Strap2 x Sealing Tape1 x G1/2 to G1/4 Adapter Note: 1.Please allow 0‑1 inch error due to manual measurement. Thanks for your understanding.2.Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.