Feature: 1. The wide time setting range of this time control switch is from 1 minute to 7 minutes, very practical. 2. The minimum setting unit is 1 minute, which enables accurate and convenient time switching setting. 3. This timer switch can applied to various lamps, including incandescent lamp, halogen lamp, and so on. 4. Can be re-triggerred, no closed-circuit current consumption, a toggle switch used for permanently lit. 5. Both the installation and setting are very simple, not easy to be disturbed by the outside interference. Specification: Item Type: Time Switch Material: ABS Shell Model: TM-ST7 Contact Capacity: AC220-240V 16A 50/60Hz Installation Type: DIN Rail Standby Power Consumption: 0W Glow Lamp Load: 50mA Setting Range: 1-7 minutes Minimum Setting Unit: 1 minute Setting Time: 1 minute, 1.5 minutes, 2 minutes, 2.5 minutes, 3 minutes, 3.5 minutes, 4 minutes, 4.5 minutes, 5 minutes, 5.5 minutes, 6 minutes, 6.5 minutes, 7 minutes. Connection Type: 3-/4-Conductor Second Handover: After 30s Contact Type: No Contact Opening Width: Approx. >3mm / 0.1in Switching Output: No Free Potential (230 V) Incandescent Lamp/Halogen Lamp Load: 2300W Fluorescent Lamp Load (conventional) Lead-Lag Circuit: 2300VA Fluorescent Lamp Load (conventional) Parallel Correction: 1300VA 70 uF Energy-Saving Lamp: 150W LED Light <2W: 30W LED Light 2-8W: 300W LED Light＞8W: 300W Fluorescent Lamp Load (electronic ballast): 600W Fluorescent Lamp Load (conventional) Series Correction: 2300 VA Switching Capacity: 6 A (at 230 V AC, cosine φ = 0.3), 16 A (at 230 V AC, cosine φ = 1) Permanent Light Switch: Toggle Switch Housing and Insulation Material: High temperature resistant, self-extinguishing thermoplastic. Ambient Temperature: -10℃ ~ +50℃ Protection Class: II in accordance with EN 60730-1. ProtectionType: IP 20 Maximum Length: Approx. 82 mm / 3.23 inches Maximum Width: Approx. 65 mm/2.56 inches Thickness: Approx. 17mm/0.67in. Package List: 1 x Time Switch Note: Do not use outside the parameter voltage range.