TON007B Bluetooth Cassette Player with Headphone Auto Reverse Function Stereo Cassette PlayerWhite

Features 1. [Bluetooth Portable Cassette Player] Play your tape collection, this retro cassette player allows you to travel back in time and relive the good memories of the past. Tip: Press the "DIR" button to auto reverse the cassette. If the play button cannot be pressed down, which may be caused by the key being stuck or (FF/REW/STOP) not being reset. 2. [Bluetooth 5.0] Compared with Bluetooth 4.2, 5.0 has wider coverage, 2 times speed, 4 times distance, lower power consumption, wider compatibility, smoother connection. Note: (If the tape is old, there will be degaussing, poor sound, noise and hum during playback. If you can't connect to Bluetooth, please check if the device has Bluetooth mode. 3. [Bluetooth Receiver and Transmitter] Bluetooth Output: Transfer music to other Bluetooth receivers such as headphone or speaker. Bluetooth Input: Directly connect with phone Bluetooth. If there is a buzzing sound when pairing, it may be caused by interference between the tape drive and the Bluetooth signal. Keep the speaker away from the tape drive. 4. [3.5mm Interface and FM Radio Function] Accepts all 3.5mm interface devices such as speakers, headphones, car stereo speakers. FM mode can receive radio (with 3.5mm headphones as antenna) and supports automatic FM channel search function. The radio function will be a good companion for your life and leisure. 5. [2 Power Ways and Auto Reverse] The wireless cassette player is powered by 2 x AA batteries (not included) or using DC 5V power supply (not included). With auto reverse, you can choose to listen to music on one side or both sides according to your preferences. The stereo cassette player fits perfectly in your pocket to travel. Specification Item Type: Bluetooth Cassette Player with HeadphoneMaterial: ABSModel: TON007BBluetooth Version: 5.0Effective Distance: Approx. 10m / 33ftBattery Type: 2 x AA Batteries (not included) How to Use How To Connect a Bluetooth Receiver Make sure to turn on your Bluetooth receiver device first. Then put 2 AA batteries (not included) in the battery compartment or use DC power (not included) 1. Press and hold the Bluetooth button for 3 seconds to turn on the Bluetooth function, the LED white light is on and flashes quickly, it will automatically search and pair the bluetooth receiver, put in the tape, and press the "play" button. After the device is successfully paired with the Bluetooth receiver, the LED white light is always on, do not put the headset into the slot when the Bluetooth is turned on 2. If the Bluetooth device is not connected, the Bluetooth will automatically turn off after the LED white light flashes for a while How To Connect Phone Bluetooth and Use FM 1. Insert the earphone (or speaker with 3.5mm AUX male) into the earphone slot, press and hold the Bluetooth button for 3 seconds to turn on, press the FM button to search for the radio, the LED light turns blue and flashes 2. When the voice prompt Bluetooth mode is turned on, turn on the mobile phone Bluetooth, search and pair the device "HC01", the blue light is always on, indicating that the connection is successful, and the mobile phone can be played through the headset or speaker. Press the "+" or "‑" button to adjust the volume 3. In FM mode, press the PLAY/STOP button to search for radio stations, and press the "+" or "‑" button to adjust the channel. 4. When the FM mode is turned on, the mobile phone Bluetooth is connected, the cassette cannot be played Package List 1 x Bluetooth Cassette Player1 x 3.5mm Stereo Headphone1 x DC Port To USB Cable1 x Manual Note Please allow some errors due to manual measurement.