Universal 9V AC/DC Power Adapter for Electric Guitar Single Effector 100240V (EU plug)

Features 1. Output: 9V(Max current to 1000mA); Input: ; Compatible with electronic guitar multi‑effect pedal. 2. Tip positive(+) design, 5.5mm x 2.1mm barrel connector. 3. UL listed, over-current/short-circuit protection, reduce noise interference. 4. 90cm cable length for ample reach from your devices to wall outlet, and hook‑and‑loop cable tie attached around the cord for portable storage. 5. Compatible with many electric keyboards, digital piano, pedal, amplifier, etc. Specification Features: 2. Tip positive(+) design, 5.5mm x 2.1mm barrel connector. 3. UL listed, over-current/short-circuit protection, reduce noise interference. 4. 90cm cable length for ample reach from your devices to wall outlet,  and hook-and-loop cable tie attached around the cord for portable storage. 5. Compatible with many electric keyboards, digital piano, pedal, amplifier, etc. Specifications: Material: Plastic Color: Black Size: Approx. 8 x 5 x 2cm / 3.1 x 2 x 0.8in, Cable Length: Approx. 90cm / 35.4in Output: 9V(Max current to 1000mA) Barrel connector Size: Approx. 5.5 x 2.1mm / 0.22 x 0.08in Packing List: 1 x Power Adapter Note:1. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.  2. The specification and size of the charger DC plug are 5.5mm outer diameter / 2.1mm inner diameter. Before purchasing, please confirm that the hole diameter of your battery socket interface and the diameter of the center pin can be exactly matched. (If the socket interface size is 5.5mm/ 2.1mm inner diameter, or 3.5mm outer diameter / 1.35mm inner diameter, etc., do not use Even if some plugs can be inserted for charging, it may lead to safety risks such as loose fit, sparking, and burning out the socket. 3. The positive and negative terminals of the charger plug are "tip positive (+), outer circle negative (-)". Before purchasing, please confirm that the positive and negative terminals of your device's socket match. Note: For a small number of devices on the market, the positive and negative terminals of the socket are "tip positive (-), outer circle negative (+)", which are opposite to those of the charger and thus cannot be used.