Universal Front Brake Line Lock Kit Heavy Duty Type Roll Control Hill Holder Kit Package Included:1Pc Silver Line Lock KitDescription :100% New Style and BrandStainle steel valve aembly for the ultimate in corrosion controlThe electric coil is fully enclosed in epoxy for reliabilityThe finned housing not only looks good but helps to diipate heatWide, lightweight base for better mounting stabilityEasily serviced in the fieldIncludes an extra threaded port for brake line preure gaugeSpecification:Type: Brake Line Lock KitModel: Roll Control Hill Holder KitVoltage: 12~24VDCColor Available:Silver, BlackColor: SilverMaterial: Stainle Steel & AluminumPad Material: Stainle Steel & AluminumLine Lock Finish: Silver AnodizedLine Lock Material: 6063 Aluminum, Stainle SteelLine Lock Type: ElectricInlet Attachment: Female ThreadsOutlet Attachment: Female ThreadsInlet Thread Size: 1/8-27 NPTOutlet Thread Size:1/8-27 NPTLine Lock Outlet Quantity: ThreeLine Lock Inlet Quantity: Only OneMounting Style: Bolt-OnSolid or Vented Rotor: SolidRotor Style: Dimpled+Drilled+SlottedSuitable for: Disc+DrumPlacement on Vehicle: FrontCaliper Finish: AnodizedSize: 15.6*18.7*7.7cm boxThese evil energy line lock kits are used for drag racing to lock the front tires of the car. This decreases the chance of your car rolling through the lights before it's time. Also locking the front wheels produces a more efficient burn-out to heat up your tires. Extensive testing has shown a 10-millisecond release time with vibration resistance up to 30-G's with no mechanical failure. On the street or off-road, the evil energy line lock can also be used as a temporary electronic parking brake when both the clutch and brake are needed at the same time. Kits allow you to lock your front or rear brakes at will.This launch control is a sophisticated device that installs into your existing brake system. The easily installed solenoid provides the brake holding capacity you are looking for. It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on the front brakes of your vehicle. It can handle preure spikes up to to 3000 PSI line preure. Include light and switch.Control to make the front and rear brakes synchronized. Hold the brake preure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12 - 24VDC electric systems.Application Summary:Used in Drag racing to positively lock the front wheels, producing a more effective burnout.Notes:This item is high quality aftermarket replacement but not original.Please kindly confirm the fitment before ordering to make sure this item is perfectly fit.Easy to install, but profeional installation is recommended.