Features 1、Made of high quality ABS plastic, high strength and good toughness. 2、Equipped with a strong adhesive that does not require modification. Give your car a great look. 3、It is easy to process and form thermoplastic polymer structure, light weight, high impact and high heat resistance. 4、Perfectly fits your rear bumper chassis for a new visual experience 5、Allow users to make full use of various angles, stable performance. 6、Applicable to all car with a rear bumper chassis width greater than 23in (584mm) (if it is smaller than this size, it will not be applicable and needs to be modified by yourself). Specification Condition: 100% Brand New Item Type: Bumper Diffuser Color: Light Black Material: ABS Size: Approx. 584 x 533 x 152mm/23 x 21 x 6in Application: for car with a rear bumper chassis width greater than 23in (584mm) Installation: 1. Thoroughly clean and dry the mounting area with a car wash soap to ensure that the surface is smooth and free of debris. 2. Before disassembling the tape cover, test that the spoiler is suitable for your car and, if appropriate, mark the location with tape. 3. Remove the back of the adhesive 4. Carefully align the spoiler to the correct position. Make sure the position is correct before applying pressure. 5. Apply pressure to the tape to ensure complete safety before driving. 6. It takes 1 hour for the adhesive to solidify. It is recommended not to wash the car within 3 days. Package List 1 x Bumper Diffuser Spoiler 1 x Sticker 6 x Screws