Feature: 1. CNC Machining Process: Turbine type pneumatic vibrator adopts CNC machining process, the accuracy is controlled within 2µm, high accuracy, so you can have more accurate use in the actual operation process. 2. Start and Stop Immediately: The vibration force of pneumatic turbine vibrator can be adjusted according to the air pressure, and it can start and stop immediately, which brings more convenience to your operation. 3. High Vibration Force: The pneumatic turbine vibrator is fast, low noise, high vibration force, safe, and uses very little compressed air, saving energy. 4. Eccentric Copper Counterweight: Pneumatic vibrator gear is installed with eccentric copper counterweight, air is charged into the air inlet hole to impact the gear to produce thrust to make the gear rotate, centrifugal force of eccentric counterweight produces vibration when rotating, and the gear is driven by the bearing. 5. Wide Application: No lubrication, just clean air, pneumatic vibrator can be used for material conveying, vibration screening, help packaging filling, casting sand mold vibration, etc. Specification: Item Type: Pneumatic Turbine Vibrator Material: Aluminum Alloy Number of Vibrations per Minute 0.2MPa 34850 0.4MPa 42000 0.6MPa 45500 Vibration Force (N) 0.2MPa 165 0.4MPa 210 0.6MPa 280 Air Consumption / Min 0.2MPa 46 0.4MPa 80 0.6MPa 112 . Package List: 1 x Pneumatic Turbine Vibrator1 x Connector1 x Silencer