Voltage Step Up Converter Adjustable Sturdy Durable Efficient Temperature Controlled Fan Boost Power Module

Feature: 1. Adjustable voltage, this is a non‑isolated dc power converter module with long service life, high power and stable output. 2. 97percent high conversion efficiency, high quality components ensures high conversion efficiency, up to 97percent . 3. Widely application, this boost power module is widely used for high power solar street lamp driving, various LED light, cv driving, vehicle‑mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging. 4. Designed with smart temperature control fan ‑‑ which will automatically work when temperature reaches about 60, and stop when temperature drops below 60. 5. This voltage step up converter is made from quality printed circuit board and aluminium, which is sturdy and durable. Specification: Item Type: Voltage Step Up Converter Material: Printed Circuit Board and Aluminium Function: High power Solar Street Lamp Driver, Constant Current Driver for Various Led Light, Power Supply for Vehicles and Various Mobile Devices, DIY Adjustable Constant Voltage and Constant Current Power Supply, Solar Charging, Charging Various Batteries. Module Type: Non isolated Boost Module (boost) Input Voltage: DC10 60V Input Current: 10 30V Input Voltage, Maximum Current 35A 40A 31 60V Input Voltage, Maximum Current 30A 35A Quiescent Current: 15mA (when 12V Rises to 20V, the Higher the Output Voltage, the Quiescent Current Will Increase) Output Voltage: 12 97V Continuously Adjustable (applicable to Low voltage Rise up Voltage Applications and Cannot Be Step down) Output Current: 22A Maximum. Please Strengthen Heat Dissipation if It Exceeds 15a (related to the Input and Output Pressure Difference, the Greater the Pressure Difference, the Smaller the Output Current) Constant Current Range: 0.8 22A (+ 0.3A) Reverse Input Protection: Yes (150A Power Mos Anti reverse) Input Low Voltage Protection: Yes (10 50V Adjustable) Self recovery Type Working Frequency: 150KHz Conversion Efficiency: 92percent 97percent (efficiency is Related to Input, Output Voltage, Current, Pressure Difference. Small Pressure Difference, High Efficiency) Input over Current Protection: Yes (input over 40A, Automatic Protection, Power Supply Does Not Boost) Short circuit Protection: Yes (input 60A Fuse) Please Operate Carefully, Please Do Not Short circuit Randomly. Reverse Input Protection: Yes (150A Power Mos Tube is Anti reverse. It Can Be Reversed for a Long Time) Installation Method: Four 3mm Copper Standoffs Wiring Method: Terminal Block (Please Use High current Pure Copper Wire) Module Size: Approx. 130 x 52 x 75mm 5.11 x 2.04 x 2.95in. Package List: 1 x Voltage Step Up Converter1 x Pillar4 x Nuts Note: 1. The output of the module cannot be switched on in a short circuit, and the current cannot be measured directly by the universal meter in a short circuit. A short circuit will burn the module.2. The input voltage cannot be lower than 10V or more than 60V, (when the input voltage is lower than 12V, please reduce the load appropriately).3. When using, it must be ensured that the input voltage is 2V lower than the output voltage.4. When using a switching power supply or other secondary power supply, please ensure that the power of the power supply should be 1.3 timesmore than the power of the module.5. When the power supply is over‑current or under‑voltage protection, the output still has a voltage close to the input value, and the protection is only that the power supply does not boost.