Specifications:Item Type: Fillers, Adhesives & SealantsMaterial Type: plasticsSpecial Features: Car Glass Repair ToolModel Name: Car Glass Repair Tool Use steps:1.Align the middle hole of the bracket to the damaged area2.Rotate the pressure cylinder to the installed solid Fixed frame3.Drop 4-6 drops of repair liquid into the pressure cylinder4.Rotate the pressure bar to the pressure cylinder Next wait patiently for 10-20 points.Clock, let the repair fluid slowly enter the broken hole :5.Remove the repair device.Observe the osmotic effect.6.Drop a few patching fluids in the damaged area, use solid Cover with chemical film7.Move the vehicle to the sun and let the sunshine shine sufficiently to ;solidify the repair fluid8.After curing, remove the curing film.Gently scrape off excess solids with a razor blade Body.Matters needing attention:1. Please park your car indoors and prohibit all ultraviolet rays (pre-curing solution = failure).2. Clean up the damaged area and prohibit moisture/dust (repair fluid can't get in = failure).3. Remove the broken glass clean and so on. The repair fluid can be repaired only when it enters the mouth, leaving no trace.3. The penetration effect of the repairing solution in the pressurized process is satisfactory and then solidified. - Once solidifiedIt's irreversible. Contact us if you have any questions.Packaging includes:1*Pressure Bar1*Repair fluid1*Pressure cylinder1*Repair blade5* Curing film1*Instructions