Condition: 100% Brand New Item Type: Wireless Socket Material: PC Maximum Load: 2000W Remote Built-in Power Supply: CR2032 Button Battery 215mah (Included) Remote Control Color: Blue, Yellow (optional) Product Size: Approx. 11 x 5.7 x 6.5 cm / 4.3 x 2.2 x 2.6 in Weight: Approx. 160g / 5.6oz Instructions: 1. In the self-locking working mode: it learns the codes matching with the same button on the remote control. Press the same button once to turn it on, and then press it again to turn it off. 2. In interlocking working mode: it is to learn the codes with two different keys on the remote control, press one key to turn on and press the other key to turn off. 3. Scope of Application: The wireless remote control socket refers to the non-contact remote control of the controlled target, which is widely used in the field of home appliances and light. Compared with wired and infrared equipment, wireless remote control and wireless transmission systems increase the degree of movement. As a result, more and more wireless remote control equipment and wireless transmission systems are used in the industrial field. The advantages over cable connections are low installation costs (no wiring, no underground works, no cable troughs), increased flexibility and reduced maintenance costs. The wireless socket does not require point-to-point transmission and can be used through wall. 4. Self-locking learning codes matching method: Firstly, plug the wireless remote control socket to the ordinary household plug-in board that is powered on. You can connect an electrical appliance to the remote control socket to manually test whether the socket is powered on normally. Then, after long pressing the learning button for about 3 seconds, the learning indicator on the interface of the remote control socket lights up. Release and immediately press any button twice on the remote control. The learning indicator flashes three times and turns off, indicating successful learning. 5. Codes clearing method: (please clear the codes firstly and then match the codes when you need to change the working mode) Press and hold the learning key on the remote socket interface for about 15 seconds, and the learning indicator will turn on and off to indicate that the codes are successfully cleared. 6. Interlocking learning codes matching method: after long pressing the learning button for about 3 seconds, the learning indicator on the remote socket interface lights up, release, immediately press any button on the remote control (or unlock key), and then press another key on the remote control (or lock key), the learning indicator flashes three times and turns off, indicating that the learning is successful.