Wirless Air shock Compressor Controller Kit Remote Control for Springs Bags Package Includes(based on you choose under the tittle): Option 1: Wired Air Compressor Kit Option 2: Wired Air Compressor Kit + Low Pressure Sensor Option 3: Wireless Air Compressor Kit Fitment: UNIVERSAL FIT FOR MOST 1/2, 3/4 AND 1 TON PICKUPS AND VANS For Dodge ram 1500 2500 3500 For Chevy Siverado 1500 2500 3500 For GMC Sirra 1500 2500 3500 For Ford F150 F250 F350 For Toyota Tundra Tacoma Feature: About Wired Air Compressor Kit ( Low Pressure Sensor) 1、Allows you to monitor and adjust the air pressure in the air spring bag from the driver's seat. 2、Performs well for light-duty or medium-duty applications and for occasional hauling or towing. 3、Includes onboard air compressor, single-gauge dash panel, air lines and hardware. 4、Compatible with any brand of air springs. 5、Single-path controls let you adjust 1 pair of air springs/shock. 6、Strict quality inspection to ensure long-term use without damage 7、Maximum air pressure: 120 psi. 8、Recommended working pressure: 5-70 PSI   9、Wire harness has flame retardant properties. 10、The air compressor has quality assurance. 11、The air compressor has a waterproof casing. About Wireless Air Compressor Kit Overview Wireless Controller Kit allows you to adjust the air springs from inside and outside the cab using a handheld remote controller or smartphone, eliminating the need for wiring and drilling holes in the cab. Moreover, it can be pre-set to meet your needs in different situations. At the same time, it can be used with any brand of air spring bags. Also, Wireless Air Controller Kit comes with complete instructions for easy installation and is 90 DAYS Warranty, which is very easy-to-use and reliable. 1. Single-path controls let you adjust 1 pair of any brand air springs. 2. Heavy-duty compressor, Maximum air pressure is 120 psi. 3. Convenient and quick all-in-one installation. 4. Professionally designed integrated manifold. 5. No air lines or wiring harnesses are required in the cab. 6. A wireless controller can activate the compressor from inside or outside the cab. 7. Free app turns your phone into a fully functional controller. 8. Three preset values can be customized to meet the needs of different scenarios. 9. The integrated installation can meet the installation requirements of various models. 10. 100% factory tested to be leak free. 11. Recommended working pressure: 50-70 PSI. 12. The compressor undergoes rigorous fatigue testing to ensure quality. 13. The air controller kit has passed the rigorous salt spray testing. 14. The connection signal between the remote control and the application APP is very stable within a range of about 20 meters from the vehicle. 15. The wireless remote control is factory matched to be used directly. About Wireless Air Compressor Kit   Note: 1. All modifications must be performed by qualified personnel and in compliance with your local modification regulations. 2. It is important to read and understand the installation instruction before you install it. 3. Press any button for 3S to activate the wireless controller, and the screen will display the last working pressure. 4. Before using the remote control, be sure to install the batteries, which are included in the accessories. 5. After downloading the APP, please make sure that the permission of Nearby devices is turned on. If it is not turned on, it will definitely crash directly. 6. To prevent the vehicle battery voltage from being drained, always operate this system with the ignition on. FAQ: 1、 Q: Why does the kit need to have a power wire to the battery and one into the fuse panel Do they do different things or could this be 1 wire A: The one connected to the fuse is needed to activate the system motherboard after the car is ignited, and the one connected to the battery is the power supply line of the air pump. They have different functions and both need to be connected. 2、 Q: Why does the compressor not run after receiving the inflate command A: The compressor duty cycle limits the compressor running time to ensure the life of the compressor. When the compressor exceeds or accumulates a running time of about 3 minutes, the system will not inflate, you need to turn off the engine and wait 10 seconds before restarting. Then, give the pressure setting command again, and the compressor will run normally. (The best way is to wait about 15 minutes before running the compressor again.) 3、 Q: Why is the connection signal not so good A: Please do not operate the remote control or mobile phone APP when there are obvious obstructions (such as direct blocking walls, large corners, large vehicles, or multiple vehicles). 4、 Q:Why does the air pump stop working before reaching the set air