1. Can use the app to control and adjust the color and brightness of the light strip through the smart bluetooth.2. Built-in 100 kinds of jump mode, DIY mode, rainbow running water mode, meteor mode, turn on/off curtain mode, music mode.3. Timing delay switch, the number of segments set at will.4. Can be equipped with wireless 2.4G remote control, the distance is farther and more stable. ( 2.4G remote control not included)5. The color and dynamic effect of each point can be set freely, the color can be selected as color block gradient or mixed gradient.6. The visible distance is up to 40m, the signal is stable, the power consumption is low, and it is easy to use.USB Controller: Can only be used for 5V LED strip Light, can`t be used for 12V & 24VDC Controller: Can only be used for 12-24V LED strip Light, can`t be used for 5VProduct Parameter:Product category: LED ControllerControl principle: BLUETOOTH 5.0APP software type: ZENGGEMobile version requirements: Android 6.0 or lOS 11 or higherRated voltage: USB-5VConnection method: USBRated Power: 144WControllable points: max 2048 pointsLED driver type: SPI:WS2812B,SM16703,SM16704,WS2811,UCS1903,SK6812,INK1003,UCS2904BControl method: mobile phone APP remote controlControl range: 40m(open area)Setting of RF remote:Open the ZENGGE app → Long press the device name → Device information → 2.4G remote control settingColour:blackMaterial:plasticThe actual product may have slight color difference or difference, which will not affect the usePackage Contents:1 * LED Strip Light ControllerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.