Oil Suction Sprayer 200ml UNIVERSAL USE - Oil sprayers have a wide range of applications and are used in various fields, especially where suction or drainage of oil, fuel, brake fluid or other fluids is required, including automotive, industrial machinery, garden equipment, boats, yachts, the oil industry. TWO HOSES + PLUGS INCLUDED - the extractor is equipped with 2special flexible hoses with a length of 215 mm and 225 mm with a diameter of 6 mm and 4 mm, which you insert into the oil filler hole. This allows you to reach virtually all tanks and expand the working capacity of the sprayer. In addition, the hoses are equipped with plugs that prevent the contents from spilling out. CAPACITY - the syringe has a capacity of 200 ml. There is a measurement of it every 50 ml. The capacity is shown in milliliters and quarters. PISTON + BLEED SYSTEM - at the opposite end of the sprayer there is a piston that allows a vacuum to be created inside the sprayer and the oil to be sucked in. Once the hose is in place and a vacuum has been created, the oil is sucked into the sprayer, allowing it to be removed safely and cleanly. SPECIFICATION - material: plastic; Hose lock: Yes; Capacity: 200ml; dimensions: 29 cm, after pulling out the plunger 44 cm; Weight: 236g; Weight in the package: 296 g. SPECIFICATION material: plastic hose lock: yes capacity: 200 ml dimensions: 219 cm after the plunger has been extended to 44 cm weight: 236 g weight in the package: 296 g INCLUDED sprayer 2 x gasket 2 x hose 2 x hose plug 1 x hose connector An oil suction sprayer is a tool used to remove or drain oil or other liquids from hard-to-reach areas. It is often used in cars, engines, and other equipment where regular oil changes are necessary.